Capable of conducting Hazard Identification Study (HAZID)...
Capable of conducting Hazard and Operability Study (HAZOP) study for the project scope in compliance with applicable COMPANY or International standards by engaging qualified and certified HAZOP Chairman having relevant experience. Also capable of conducting Re-Validation HAZOP for the operating facilities by referring to available documentation.
We have our in-house experienced scribe who has hands-on experience in recording the session proceedings and coordinating with the Chairman for HAZOP Node marking, coordinating with Client representatives for the collection of documents referred for the study.
We start the HAZOP study by having an alignment session with Client representatives to get align with the project scope and Client requirements, where the approach towards HAZOP Node segregations (system-wise or equipment-wise), selection of Risk Matrix, schedule and agenda were discussed and finalized.
Based on alignment session outcomes, a HAZOP Terms of Reference will be prepared, if required by the Client, along with Node list and Node Marked P&IDs and will be shared with Client representatives for prior review and approval, based on which the sessions will be conducted.
The nominated Chairman shall hold the responsibility for the smooth progression and completion of the HAZOP session. Upon completion of the session a draft HAZOP report, with clear recommendations with the nominated action parties will be issued for Client review and approval.
Capable of conducting Safety Integrity Level (SIL) classification study for the project scope in compliance with applicable COMPANY or International standards by engaging qualified and certified SIL Chairman having relevant experience. Also capable of conducting SIL Re-Validation for the operating facilities by referring to available documentation.
We have our in-house experienced scribe who has hands-on experience in recording the session proceedings and coordinating with the Chairman for SIF list preparation, coordinating with Client representatives for the collection of documents referred for the study.
We start the SIL study by having an alignment session with Client representatives to get align with the project scope and Client requirements, where the approach towards SIL methodology segregations (LOPA or Risk graph), selection of Risk Matrix, schedule and agenda were discussed and finalized.
Based on alignment session outcomes, a SIL Terms of Reference will be prepared, if required by the Client, along with the SIF list and will be shared with Client representatives for prior review and approval, based on which the sessions will be conducted.
The nominated Chairman shall hold the responsibility for the smooth progression and completion of the SIL session. Upon completion of the session a draft SIL report, with clear recommendations with the nominated action parties will be issued for Client review and approval.
Capable of conducting Simultaneous Operations (SIMOPS) study for the project scope in compliance with applicable COMPANY or International standards by engaging qualified SIMOPS Chairman having relevant experience.
We have our in-house experienced scribe who has hands-on experience in recording the session proceedings and coordinating with the Chairman for SIMOPS matrix preparation, coordinating with Client representatives for the collection of documents referred for the study.
We start the SIMOPS study by having an alignment session with Client representatives to get align with the project scope and Client requirements, where the approach towards SIMOPS matrix preparation based on the construction schedule, selection of Risk Matrix, schedule and agenda were discussed and finalized.
Based on alignment session outcomes, a SMOPS Terms of Reference will be prepared, if required by the Client, along with SIMOPS matrix based on permitted operations, construction sequence, etc., and will be shared with Client representatives for prior review and approval, based on which the sessions will be conducted.
The nominated Chairman shall hold the responsibility for smooth progression and completion of the SIMOPS session. Upon completion of the session a draft SIMOPS report, with clear recommendations with the nominated action parties will be issued for Client review and approval.
Capable of conducting ALARP Demonstration and Bow-Tie Workshop for the project scope in compliance with applicable COMPANY or International standards by engaging qualified Chairman having relevant experience.
We have our in-house experienced scribe who has hands-on experience in recording the session proceedings and coordinating with the Chairman for developing Bow-Tie diagram based on identified Major Accidental Hazards and its protective and mitigative barriers, coordinating with Client representatives for collection of documents referred for the study.
We start the ALARP Demonstration and Bow-Tie study by having an alignment session with Client representatives to get align with the project scope and Client requirements, where the approach towards the development of Bow-Tie diagram, ALARP principles, selection of the Risk Matrix, schedule and agenda were discussed and finalized.
Based on alignment session outcomes, an ALARP Demonstration and Bow-Tie study Terms of Reference will be prepared, if required by the Client, along with the detailed list of identified protective and mitigative barriers and the same will be shared with Client representatives for prior review and approval, based on which the sessions will be conducted.
The nominated Chairman shall hold the responsibility for the smooth progression and completion of the ALARP and Bow-Tie session. Upon completion of the session a draft ALARP and Bow-Tie Workshop report, with clear recommendations with the nominated action parties will be issued for Client review and approval.
Capable of conducting Human Factors Engineering (HFE) study for the project scope in compliance with applicable COMPANY or International standards by engaging qualified HFE Study Lead having relevant experience.
We start the HFE study by having an alignment session with Client representatives to get align with the project scope and Client requirements, where the approach towards the HFE study based on the design development, 30%, 60%, and 90% 3D Model progress, building architectural design development, availability of control panel or console layouts, schedule and agenda for HFE workshops were discussed and finalized.
Based on alignment session outcomes, a HFE Terms of Reference will be prepared, if required by the Client, along with HFE checklists and the same will be shared with Client representatives for prior review and approval, based on which the sessions will be conducted. All necessary inputs for the study will be listed and an official data request will be raised, an input register will be maintained to record the receipt of input documents with its revision details.
The nominated Study Lead shall hold the responsibility for the smooth progression and completion of the HFE sessions. Upon completion of the session a draft HFE report, with clear recommendations with the nominated action parties will be issued for Client review and approval.
A dropped object study is conducted to identify the potential for a hazardous situation arising from an object being dropped from cranes or lifting facilities during project execution.
We conduct the study in compliance with company and/or international standards. The objective is to identify potential dropped objects, vulnerable targets, estimate drop frequency, and calculate both dropped load impact and swing impact energies, while assessing risk to personnel. This includes topside (on facility structure) and subsea (pipeline/equipment) drops.
Client input is needed: lift locations, detailed lift paths, subsea equipment layout, etc.
Final deliverables include risk reduction recommendations, frequency/probability calculations, drop cone modeling (for current effects), and energy estimations for both topside and subsea scenarios.
Capable of conducting Quantitative Risk Assessment (QRA) study for the project scope in compliance with applicable COMPANY or International standards by engaging qualified QRA Study Lead with relevant experience.
We initiate the QRA study by aligning with Client representatives to understand the project scope and requirements. This involves discussions on the methodology to be employed, data collection procedures, risk tolerance criteria, and schedule for the study. Based on the alignment session outcomes, a QRA Assumptions register will be prepared, detailing the study objectives, scope, methodology, and assumptions considered for the Study. This document will be shared with Client representatives for review and approval before proceeding with the study.
All necessary inputs for the study will be listed and an official data request will be raised. Our team maintains an input register to record and track the receipt of all necessary input documents and data required for the study. The QRA Study Lead oversees this process to ensure all relevant information is obtained.
The QRA study progresses under the guidance of the nominated Study Lead, who is responsible for ensuring the smooth execution and completion of the study. This involves coordinating with subject matter experts, conducting risk analyses using appropriate tools and techniques, and generating risk assessment reports.
Upon completion of the study, a comprehensive QRA report will be prepared, presenting the findings, risk assessment results, and recommendations for risk mitigation measures. This report will be submitted to the Client for review and approval. We also conduct a results presentation session to present the study outcomes and discuss any further actions required.
Capable of conducting Fire and Explosion Risk Assessment (FERA) for the project scope in compliance with applicable COMPANY or International standards by engaging qualified FERA Study Lead with relevant experience.
We initiate the FERA study by aligning with Client representatives to understand the project scope and requirements. This includes discussions on methodology, data collection procedures, and schedule. Based on alignment session outcomes, a FERA Assumptions Register will be prepared, detailing the study objectives, scope, methodology, and assumptions. This will be shared with the Client for review and approval.
All necessary inputs will be compiled and tracked using an input register. The FERA Study Lead ensures timely and accurate collection of relevant data from the Client.
The study is conducted under the direction of the nominated Study Lead, coordinating with subject matter experts to perform consequence analysis and risk assessment using appropriate tools and techniques.
Upon completion, a comprehensive FERA report will be submitted to the Client, detailing findings, risk results, and recommendations. A presentation session may also be arranged to walk through the results and next steps.
Capable of conducting Environmental Hazard Identification Study (ENVID) for the project scope in compliance with applicable Environmental Laws, Decrees, COMPANY or International standards by engaging a qualified ENVID Chairman with relevant experience.
We have an in-house experienced scribe who records the session proceedings and coordinates with the Chairman for ENVID Node identification, and with Client representatives to collect documents referred for the study.
We begin the ENVID study with an alignment session with Client representatives to clarify the project scope and Client requirements. During this session, we finalize the ENVID Node segregation approach (system/area/activity wise), Risk Matrix, agenda, and schedule.
Based on the alignment outcomes, an ENVID Terms of Reference will be prepared (if required by the Client) along with the Node list and shared for prior Client review and approval, based on which the sessions will be conducted.
The nominated Chairman ensures smooth progression and completion of the session. Upon conclusion, a draft ENVID report with actionable recommendations will be submitted for Client review and approval.
Capable of conducting Human Factors Engineering (HFE) study for the project scope in compliance with applicable COMPANY or International standards by engaging qualified HFE Study Lead having relevant experience.
We start the HFE study by having an alignment session with Client representatives to get align with the project scope and Client requirements, where the approach towards the HFE study based on the design development, 30%, 60%, and 90% 3D Model progress, building architectural design development, availability of control panel or console layouts, schedule and agenda for HFE workshops were discussed and finalized.
Based on alignment session outcomes, a HFE Terms of Reference will be prepared, if required by the Client, along with HFE checklists and the same will be shared with Client representatives for prior review and approval, based on which the sessions will be conducted. All necessary inputs for the study will be listed and an official data request will be raised, an input register will be maintained to record the receipt of input documents with its revision details.
The nominated Study Lead shall hold the responsibility for the smooth progression and completion of the HFE sessions. Upon completion of the session a draft HFE report, with clear recommendations with the nominated action parties will be issued for Client review and approval.
Welcome to ESSE Tech! How can we help you?
